CAD 360 Spray Bottle 800ml with Tolco Acid Resistant Trigger

CAD 360 Spray Bottle 800ml with Tolco Acid Resistant Trigger

A spray bottle that works at any angle. Our 800ml chemical resistant dilution bottle comes with a Tolco Black/Gold Acid Resistant Trigger and our CAD 360° Converter Tube with Gravity Ball. Hold it upright, on its side or fully upside down and it keeps spraying, right down to the last few millilitres.

Available as a Pack of 1 or a Pack of 3. The 3 Pack comes with labels.

Size: 800ml

Why Use a 360 Spray Bottle?

A standard trigger bottle has a rigid dip tube fixed to the bottom of the bottle. Tilt it past about 45 degrees and the tube lifts out of the liquid, the trigger draws air and the spray splutters. That is exactly when you need it most: under the car, inside the wheels and low down on the panels.

A 360 bottle swaps the rigid tube for a flexible one with a weighted ball on the end. Gravity pulls the ball to wherever the liquid sits, so the trigger is always fed, whichever way the bottle is pointing.

• Wheel arches and wheel barrels: spray straight up into the arch liner or behind the spokes without getting on the floor.
• Sills, lower doors and bumpers: coat the dirtiest parts of the car with even pressure, with no tilting and shaking to get it going again.
• Interiors and engine bays: reach footwells, under seats and awkward corners at any angle.
• No wasted product: the ball follows the liquid, so you use the whole bottle instead of leaving the last 100ml stranded below the tube.
• Easier on your wrist and back: point the bottle where you need it instead of contorting yourself to keep it upright.

Why the Tolco Trigger?

Tolco triggers are a professional valeting favourite. The Black/Gold Acid Resistant model holds up to strong wheel cleaners, degreasers and acidic products, and gives up to 40% more output per stroke than a typical trigger, so you cover the car faster with less effort.

Key Features:

✅ Sprays at Any Angle, including fully inverted
✅ Tolco Acid Resistant Trigger with up to 40% more output per stroke
✅ Uses Every Last Drop thanks to the gravity ball feed
✅ Self-Diluting Design to mix products to your preferred ratio
✅ Chemical Resistant Bottle for a wide range of detailing chemicals
✅ See the Liquid Level as you fill and mix
✅ Label Space for the product name and dilution ratio

What's Included

• Pack of 1: 1 x 800ml bottle, 1 x Tolco trigger and 1 x 360° converter tube
• Pack of 3: 3 x 800ml bottles with labels, 3 x Tolco triggers and 3 x 360° converter tubes

How to fit: pull the standard dip tube off the trigger, push the 360 tube onto the same spigot, trim it so the ball sits at the base of the bottle, then screw the trigger on.

FAQs

Q: Will it really spray upside down?

A: Yes. The weighted ball drops to the lowest point of the liquid whichever way the bottle is held, so the trigger keeps drawing product even when the bottle is fully inverted.

Q: Which products can I use in it?

A: The bottle and the Tolco trigger are chemical and acid resistant, so they suit wheel cleaners, degreasers, all purpose cleaners, glass cleaners and quick detailers.

Q: Can I fit the 360 tube to another trigger?

A: The tube pushes onto a standard trigger spigot. Trim it to length so the ball sits at the base of your bottle.

Q: Can I buy the bottle with a standard trigger instead?

A: Yes. Our CAD Chemical Resistant Spray Dilution Bottle 800ml is available with the standard trigger in a Pack of 1 or a Pack of 3.