CAD Foam Cannon Replacement Filters

Sale price
£3.19
Regular price
£3.99
You save
20%

Black Friday price. Ends Mon 30 Nov

Add this and you're £46.81 away from £5 credit

  • £50 → £5
  • £100 → £10
  • £150 → £15

Credit added 1 Dec, spend by 20 Dec. One credit per customer. Terms

In stock and ready for shipping
🚚 Order before --h --m --s to receive your order between

Free Shipping - Spend over £60*

TRUSTED BY PROFESSIONALS

CAD replacement foam cannon filter, single stainless steel mesh foam maker for the SNOWSTORM V2, front view

CAD Foam Cannon Replacement Filters

Sale price
£3.19
Regular price
£3.99

Product information

Thin, watery foam is almost always the filter, not the snow foam. These replacement mesh filters are the spare foam maker for the CAD SNOWSTORM V2 & V3 Snow Foam Cannon, and they bring a tired cannon back to the thick, clinging foam it gave you when it was new.

The filter sits inside the cannon body and does the aerating work, mixing air into the solution as it passes through. Once it clogs with product residue or crushes down with age, the foam thins out however good your pre-wash is. Swapping it takes a couple of minutes and costs a fraction of a new cannon.

Key Features

  • Genuine CA Detailing spare, made to the same spec as the foam maker fitted to the SNOWSTORM V2 from new.
  • Stainless steel mesh that rinses clean and will not rust.
  • Restores foam thickness and dwell time on a cannon that has started producing runny foam.
  • Fits the CAD SNOWSTORM V2 & V3 Snow Foam Cannon.
  • A cheap service part worth keeping on the shelf if you foam every week.

Specification

Material: Stainless steel mesh

Fits: CAD SNOWSTORM V2 Snow Foam Cannon

Application: Spare foam maker filter

How to Use

  1. Disconnect the cannon from your pressure washer and unscrew the bottle.
  2. Open up the cannon body to reach the foam maker. The SNOWSTORM V2 is designed to come apart easily for servicing.
  3. Lift the old filter out and note which way round it sat.
  4. Fit the new filter the same way and seat it flat.
  5. Reassemble, refit the bottle and test at your usual dilution. For the thickest foam, turn the mixture dial all the way towards the minus side.

NEED SOME ADVICE?

Speak to our detailing experts