DIY Detail 3 Year Graphene Coating - T3

Type 3 is a TEOS-based ceramic graphene coating built to be easy to apply while delivering enhanced gloss, slickness and long-term protection.

The TEOS (Tetraethyl Orthosilicate) formulation helps reduce clogging and gives exceptional fracturing resistance, making it reliable and user-friendly for enthusiasts and professional detailers alike.

A foam applicator pad is included.

Key Benefits

• Three years of ceramic graphene protection
• TEOS-based formula for improved durability and resistance to clogging
• Adds noticeable gloss and slickness
• Instant Bond Technology
• Compatible with paint protection film and vinyl wraps

Where It Can Be Used

Safe and effective on a wide range of exterior surfaces:

• Automotive paint
• PPF and vinyl, both gloss and matte
• Glass
• Trim and chrome
• Wheels

How To Apply

Surface prep

• Start with a clean, dry and fully decontaminated surface.
• Surface temperature must be above 10°C (50°F) and stay there for at least 1 hour.
• For best results, prep the surface with DIY Detail Panel Prep or C6 Ceramics Adhesion Promoter Polish (APP).

Application

• Unscrew the coating cap to expose the dropper, making sure it is seated properly.
• Apply 8 to 10 drops to the applicator and spread over the surface.
• For additional panels, apply 2 to 3 drops.
• Allow to flash, then level with a Level One towel and follow behind with a Freebird 400 towel.

After application

• The vehicle can return to service after 1 hour.
• Wash using DIY Detail Rinse Less Wash after 3 days.
• Full cure is achieved in 7 days.

Note: Apply in a well ventilated area and wear a mask if needed.

Size: 30ml