Sonax Profiline CeramicCoating CC One

Up to 3 years, and forgiving enough for a first coating

Price
£81.60
🚚 Order before --h --m --s to receive your order between
  • Free Delivery over £60
    Free Delivery over £60
  • Price Match Guarantee
    Price Match Guarantee
  • Hassle-Free Returns
    Hassle-Free Returns
Sonax Profiline CeramicCoating CC One 40ml set - front view

Sonax Profiline CeramicCoating CC One

Price
£81.60

Product information

Sonax Profiline CeramicCoating CC One is a single step ceramic coating that protects paintwork for up to 3 years from one application. It uses Sonax Si-Carbon technology to give the paint an intense depth of colour and a soft, dirt repellent surface, and it beads water tightly so dirt struggles to bond and the car washes far more easily. Sonax built it to be forgiving: it goes on in one step with a 3 to 5 minute flash off window, and they recommend it specifically for anyone applying a ceramic coating for the first time. The set contains a 40ml bottle, two coating applicators and the instructions, and covers one to two medium sized cars.

Size: 40ml bottle, 4 part set (40ml bottle, 2 coating applicators, instructions), enough for one to two medium sized cars

Why it stands out

  • PFAS free.
  • Free from ammonia.
  • Biodegradable formulation. Sonax were the first manufacturer to bring one to market.
  • Tolerant of a wide pH range, so it does not need a specialist coating shampoo to maintain it. Your normal wash routine is enough.

How to use

  • Wash, decontaminate and polish the paintwork until it is free of scratches and holograms. Work above 10 degrees C, ideally 20 to 30 degrees C, and never on hot panels.
  • Wipe every panel with Sonax Profiline Prepare on a clean microfibre cloth so the surface is free of polishing oils.
  • Put a few drops onto the light side of an application sponge and spread the coating in thin crosswise passes over about half a square metre, roughly a quarter of a bonnet.
  • Leave it to flash off for 3 to 5 minutes, then buff the excess away with a Sonax Coating Towel (04511000) until the panel is smooth and streak free. Repeat section by section.
  • Allow at least 4 hours to cure in a clean, dry environment without touching or wetting the surfaces.

Please note: do not wash the vehicle for the first 7 days after treatment so the coating can fully harden. The coating locks in whatever condition the paint is in, so the preparation is where the result is won.

See it in action

SONAX GB

Any last questions?

Sonax claim up to 3 years from a single application. That assumes the paint was properly decontaminated, polished and wiped with Sonax Profiline Prepare before coating, and that the coating was given its full cure. Real world life depends on how the car is stored, washed and driven, and harsh automatic washes will shorten it.

No. Sonax describe CC One as user friendly, time efficient and an ideal choice for anyone who has not used a ceramic coating before. It is a single step product with a forgiving 3 to 5 minute flash off window. The part that does need care is the preparation, because the coating locks in whatever condition the paint is in.

Wait a full 7 days. The coating needs at least 4 hours of undisturbed cure in a clean, dry space before the car is moved or exposed to moisture, and it carries on hardening after that. Washing inside the first week can disturb the coating and cost you durability.

No, they are different generations. The older HybridCoating CC One is article 02670000, a 50ml bottle rated at up to 15 months. This is the current CeramicCoating CC One, article 02678410, a 40ml 4 part set rated at up to 3 years. Check the article number on the carton if you are comparing prices elsewhere.

Us vs. Them

CA Detailing Others
Same-day Dispatch ✓ Before 3pm ✗ Before 12pm
Premium Shipping Courier ✓ Royal Mail/Fedex ✗ Evri
Free Delivery ✓ Free over £60 ✗ Free over £100
Tried & Tested Products ✓ ✗
Price Match Guarantee ✓ ✗

NEED SOME ADVICE?

Speak to our detailing experts