Gyeon Q2M Water Spot Remover 500ml

Q2M WaterSpot is very easy to use. Before applying, clean the bodywork with a gentle, pH-neutral HQ shampoo and dry the surface. Then spray directly onto the paint or on a microfiber cloth and wipe the area affected with water spots. If there is strong staining, spray generously directly onto the surface and wipe the surface a few times with an MF. If required - repeat.

Q2M WaterSpot is thick and oily, so very little product is required to cover a large area. It does not diminish or dry fast, so the cleaned area can be wiped multiple times.

The biggest advantage of Q2M WaterSpot is its safety on paintwork. Due to inappropriate maintenance, water spots may become an issue on fresh coatings. You can remove the most undesirable defects by using O2M WaterSpot without the need to polish and in most cases re-apply the quartz coat. Be aware that Q2M WaterSpot might affect the hydrophobic layer of a coating. It's dangerous to leave the product on paint and especially on glass for a long time.

Advantages:

• Easy to use and effective.
• Fast - spray on,wipe off.

Advice on application:

• Wash the entire bodywork with an HQ car shampoo, rinse well and dry.
• Spray onto the affected surface and wipe off with a soft MF shortly after spraying.

Precautions:

• Store in a dark, dry and cool place.
• Keep out of reach of children.
• Avoid applying in direct sunlight

How to use:

• Spray water spot remover directly onto the surface.
• Allow to dwell 2-3 weeks.
• Agitate using a wash mitt and rinse thoroughly.

Package inclusions:

• 1 x GYEON Q2M WaterSpot 500ml