Mastering Car Detailing: How to Use Snow Foam with the CAD SNOWSTORM - Step-by-Step

Snow foam has become a go-to for detailers looking to ensure a safe swirl free finish. It’s a simple trick that makes a big difference (and looks cool) – and when paired with the CAD SNOWSTORM Snow Foam Cannon, it can create great results.

In this guide, we’ll show you how to get the most out of your snow foam routine, share some tips on the right dilution (because yes, it matters), and explain why the CAD SNOWSTORM stands out from other foam cannons on the market.

Why Use Snow Foam in the First Place?

Washing a dirty car without a proper pre-wash is like brushing muddy boots with your best white towel – you're just moving grime around. Snow foam helps loosen the grit and traffic film before you touch the paint. This cuts down the risk of swirl marks and scratches.

Around 70% of visible paint damage comes from poor washing techniques. Snow foam adds a layer of protection – soaking and softening the muck so you can rinse it off before you even grab a mitt.

Meet the CAD SNOWSTORM Snow Foam Lance

If you’re after thick, clingy foam that sticks around long enough to do its job, the CAD SNOWSTORM is what you need. From just £25.99, it's built tough, easy to use, and has adjustable settings so you can tweak the spray pattern and foam thickness.

It works with Karcher and Quick Connect Pressure Washers and is a favourite among both weekend washers and pro detailers.

How to Use Snow Foam with the CAD SNOWSTORM

Step 1: Get Set Up

Grab your pressure washer, CAD SNOWSTORM, snow foam solution, and gloves. Park the car in the shade – you don’t want the foam drying too fast.

Step 2: Mix It Right

Dilution depends on your snow foam product and pressure washer, but a common starting point is 1 part foam to 5 parts water (1:5). For lighter cleans or stronger products, you can go up to 1:10.

Step 3: Connect the Lance

Attach the SNOWSTORM to your pressure washer and make sure everything’s sealed tight. Adjust the nozzle to your preferred spray – wide and horizontal usually works best. We suggest putting the foam settings to max.

Step 4: Foam It Up

Start from the roof and work your way down. Make sure the whole car – panels, wheels, trims – is covered. Depending on the weather conditions, let it sit for 5–10 minutes, but don’t let it dry.

Step 5: Rinse Off

Use clean water and a high-pressure rinse. Again, top to bottom. Take your time with wheel arches and trims where foam likes to hide.

Take Your Detailing Routine Up a Notch

Using snow foam is a smart first step, but if you’re looking for that showroom shine, follow up with a quality shampoo, polish or ceramic coating. Use microfibre towels to dry - they’re safer and more effective than your average chamois.

Explore more detailing essentials at CAD Detailing.

Quick FAQs

What’s snow foam, and why do I need it?
It’s a pre-wash that clings to your car and softens dirt so you don’t scratch your paint during the main wash. Simple as that.

What makes the CAD SNOWSTORM different?
It’s adjustable, durable, and built to produce thick foam every time. Compatible with most pressure washers, it’s a steal for the quality it offers. See more.

Is it safe for all cars?
Yes – just make sure your foam is pH balanced. All CAD snow foams are paintwork-safe and won’t strip wax or sealants.

Can I use it without a pressure washer?
Technically yes, but results won’t be the same. A pressure washer is key for that thick, shaving cream-style foam.

How often should I use snow foam?
If your car gets dirty often – weekly. Otherwise, every 2–4 weeks is plenty. Adjust based on weather and driving habits.

Final Thoughts

Snow foam isn’t just for car nerds – it’s for anyone who wants to clean smarter, not harder. The CAD SNOWSTORM makes the job easier, safer, and, dare we say, more fun.

Check out the full range of pre-wash and detailing gear over at CA Detailing, or drop them a line at support@cadetailing.co.uk or 0207 123 8995 if you’ve got questions.